Part 1: Finishing Services that Add to or Alter the Component Surface

There are a variety of surface finishing techniques that add to or alter the surface layer of metal for a precision turned component.  These finishing techniques can be utilized for aesthetic reasons, to protect the part from environmental factors or to improve the function of the part.

Precision Machined Component with Bead Blast Finishing - Pioneer Service

Most finishing techniques can be applied to precision machined components that have been produced on CNC Swiss and CNC turning equipment.  However, the material, part design and final requirements will need to be evaluated with our engineering and quality teams to ensure that the best combination of techniques are being considered.

Here is a quick overview of the some of the most common types of finishing services:

Bead Blast –

bead blasting the surface of a precision machined component creates a uniform matte (satin) finish and removes the tool marks that are often visible from the machining process. This is often used when the component will be visible. As the name suggests, the component is blasted with small beads from a pressured gun. The process removes some material and leaves a smooth surface. Precision Machined Component with Black Oxide Finishing - Pioneer Service

Black Oxide –

Black oxide is a conversion coating which turns the surface of the precision machined component black.  It is used for mild corrosion resistance, to minimize light reflection and often for appearance.  Many parts for the firearms industry require a black oxide finish to reduce light reflection. More on this process can be found in our blog post on Black Oxide .


Burnishing is a forming process that alters the surface finish, size or surface hardness of a precision machined component and creates a mirror finish. It can be used to improve corrosion resistance, to eliminate surface porosity , reduce fatigue failure and reduce surface visual defects. In the process, a hardened and coated ball or roller are run over the surface of the component to deform (or shape) it to the specified requirement.

Case Hardening

Case hardening is a process to harden the surface of a metal component, while leaving the interior (core) metal at its original, softer state.  Precision Machined Component with Heat Treat Finishing - Pioneer Service This allows the core of the component to absorb stresses, but the outer surface to have improved wear resistance . There are several different types of case hardening processes depending on the material and requirements. The most common types of case hardening for precision machined components include flame hardening, carburizing and nitriding. Flame hardening is the most common and heats the component (or bar stock) rapidly to a specified temperature, and then cools it rapidly, creating a layer of martensite on the surface.  Carburizing and Nitriding are explained below.

Diffusion processes –

  1. Carburizing: a type of case hardening process where the steel component is put in a carbon rich vacuum tank that elevates the temperature for a certain amount of time before quenching the part so that carbon is locked into the structure creating a hardened surface.
  2. Nitriding: in this process, the steel part is heated to a high level in a tank with ammonia gas for a specified amount of time. Nitrides form on the surface, creating a hardened surface. No quenching is needed with this process. Nitriding causes the least amount of distortion, but also requires the steel to have chromium, molybdenum and aluminum in its makeup.

Electroless (chemical) Plating

In this process, the metal coating on the machined component is achieved in a chemical bath that includes a catalyst (in contract to the electroplating process which uses an electrical current to plate the component). Plating provides improved surface finishes, as well as improved wear and corrosion resistance. The main advantage of electroless plating is that it creates an even layer of plating, regardless of the geometry of the part. Electroless nickel plating is a common type of plating specified for precision machined components.

El ectroplating

is a process used to coat a machined component with a layer of metal, using an electrical current.  Widely used to improve surface qualities, it offers improved appearance, corrosion and abrasion resistance, lubricity, electrical conductivity and reflectivity, depending on the substrate and the plating material choice.

There are two general ways of electroplating machined components, depending on the size and geometry of the part:  barrel plating (where the parts are put in a rotating barrel filled with the chemical bath) and rack plating (where the parts are attached to a metal rack and the rack is then dipped in the chemical bath).  Barrel plating is used for small parts with simple geometries, and rack plating is used for larger parts with complex geometries. Precision Machined Component with Knurling Finishing - Pioneer Service


is a process to add a series of indentations on a machined part so it is easier to handle (doesn’t slip in someone’s grip). It is often used on fasteners where they will need to be screwed into something – the knurled surface makes it easier to grab the part for turning.  Knurling can be done on a CNC Swiss part during the turning process or added to a part after it has been machined.


is a conversion process which changes the surface layer of the component.  Parts are dipped in a chemical bath which changes (converts) the chemical composition of the surface. The terms passivation refers to the fact that the process makes the material more passive (less likely to be affected by the environment). The coating protects the substrate material. Precision Machined Component with Blue Anodize Finishing - Pioneer Service

  1. Anodizing – is a type of passivation process that is used to increase the thickness of the oxide layer on the surface of precision machined components, which increases the part’s resistance to corrosion and wear and reduces the galling on threaded components. Used often on aluminum parts. Anodizing produces a nonconductive surface finish.
  2. Chromate Conversion uses a particular type of solution – in the past this was mostly hexavalent, but many companies are moving to trivalent (blue and yellow finishes which meet the EU initiatives and RoHS standards ). Chromate conversion produced an electrically conductive surface finish.

Thread Rolling

is a forming process that produces a thread on a precision machined component. While many threads can be produced during the turning process on a CNC Swiss machine, some materials (like titanium) are best thread rolled after the blanks are machined. Many aerospace threaded fasteners use threads rolled after machining.  In this process a die that is shaped with the threads is pressed against the machined blank, and physically moves (displaces) the material to form the threads (as opposed to the making threads on a CNC Swiss lathe, where the thread is formed by removing material from the bar stock). Just from a visual comparison, it is difficult to tell the difference between threads that are thread rolled or threads that are machined.

Pioneer Service has developed an extensive network of qualified vendors for projects with specific finishing requirements. We have produced a wide variety of custom turned components for clients in the Aerospace , Medical , Hydraulics , Oil and Gas , Test and Measurement , and Industrial Markets with unique surface finish specifications.  We are AS9100D and ISO 9001:2105 certified . Custom washers, bolts, poppets, fasteners, screws, spacers, flanges, rods, buttons, studs, rivets, knobs, nozzle tips, collars, pistons, inserts, electrodes, shafts, bushings, caps, sleeves, ferrules, stems, o rings,  rods, nuts and pins are some of the many types of parts we make for our customers.